Classic Banded V-Belts

VARIBELT*VX® Banded V-Belts are an excellent solution for drives with longer center distance or for drives with pulsating and harsh vibration and high shock loads where individual belts vibrate and whip severely, roll over and even come off the drives.

VARIBELT*VX® Banded V-Belts are available in Classic, Wedge and Narrow sections in Wrapped and Cogged constructions.

General Characteristics of VARIBELT*VX® Banded V-Belts;

• Provide enhanced power transmission capacity
• High adhesion strength between tie-band and the belts
• Eliminate risk of mismatch in length
• Manufactured through single-stage curing process

Thanks to the specially engineered, reinforced fabric, tie-band on top, which bonds single V-belts together, VARIBELT*VX® Banded V-Belts function as a single V-belt with even load distribution and wear, achieving enhanced stability and preventing belt turnover and whip.

They are widely used in heavy-duty machinery such as forestry woodcutters, wood chippers, mining machinery, etc.

Advantages of VARIBELT*VX® Banded V-Belts;

• Increased power transmission capacity up to 25%, compared to single V-belts
• Enhanced stability
• Minimized belt whip and rollover on long center distance drives
• Static dissipation allows for superior resistance to oil and heat
• Minimized vibration
• Heavy shock loads are absorbed better.
• Smooth operation
• Temperature range: -18°C to +80°C
• Aramid cord construction is available.

Now made with EPDM (Ethylene Propylene Diene Monomer), a synthetic rubber with outstanding properties, VARIBELT VX® Classic Banded V-Belts are static conductive, more durable, and more resistant to heat, hardening, and glazing than ever before.

Applications:

• Severe vibrations
• Vertical shaft drives
• V-flat drives
• Agricultural drives
• Conveyer systems

VARIBELT*VX® Banded V-Belts are especially engineered to handle the toughest industrial applications such as;

• Heavy duty machinery in Forestry

  • Wood cutters
  • Wood chippers
    • Mining machinery
    • Rock crushers,
  • Vibrating equipment,
  • Compressors,
  • Generator sets,
  • Cold forging machinery,
  • Saws,
  • Pumps, and more;

Varibelt VX® V-belts exceed USA RMA published ratings levels.

Varibelt VX® V-belts are manufactured to meet the same RMA/ISO Standards as all other major American or European Manufacturers’ belts of the same type. Designed to perform at identical or higher levels, Varibelt VX V-belts and Agrobelt V-belts are dimensionally and functionally equivalent to V-belts produced by major American and European manufacturers.